IAC44 A User Manual - Revision history

Wikisysop: /* 3.Maintenance */

2025-01-24T11:50:27Z

3.Maintenance

← Older revision		Revision as of 11:50, 24 January 2025
Line 282:		Line 282:
	[[File:IAC44A Kernel Logs.png]]		[[File:IAC44A Kernel Logs.png]]

	= 2. Setting =		== 2. Setting ==
	In this “Setting” module the user can Configure/update all the required parameters related to Network, SIM Switch, Internet, VPN, Firewall, Loopback Rule, Remote monitoring, Tunnel as per requirement.		In this “Setting” module the user can Configure/update all the required parameters related to Network, SIM Switch, Internet, VPN, Firewall, Loopback Rule, Remote monitoring, Tunnel as per requirement.

Wikisysop at 11:45, 24 January 2025

2025-01-24T11:45:51Z

← Older revision		Revision as of 11:45, 24 January 2025
Line 4,059:		Line 4,059:


	5.3 Modem		=== 5.3 Modem ===

	This modem status page provides comprehensive information about the cellular connection's network operator, technology, mode, and various signal quality metrics.		This modem status page provides comprehensive information about the cellular connection's network operator, technology, mode, and various signal quality metrics.

			[[File:IAC44A Modem .png]]

	== 5.4 Routes ==		=== 5.4 Routes ===
	This configuration shows how the router directs traffic between different networks and interfaces, ensuring proper communication within the local network and to external networks via the default gateway.		This configuration shows how the router directs traffic between different networks and interfaces, ensuring proper communication within the local network and to external networks via the default gateway.

Line 4,077:		Line 4,077:
	Example: Local networks '''192.168.10.0/24''' and '''192.168.100.0/24''' are managed through '''eth0.1''' and '''ra0''', respectively.		Example: Local networks '''192.168.10.0/24''' and '''192.168.100.0/24''' are managed through '''eth0.1''' and '''ra0''', respectively.

	''Refer the below image''		''Refer the below image''

			[[File:IAC44A Routes.png]]

	= 6.Logout =		= 6.Logout =
	The user should click on log out option to logged out from the router application.		The user should click on log out option to logged out from the router application.

	[[File:Logout.png~~\|frameless\|620x620px~~]]		[[File:Logout.png]]

Wikisysop at 11:24, 24 January 2025

2025-01-24T11:24:02Z

Show changes

Wikisysop at 10:07, 24 January 2025

2025-01-24T10:07:17Z

← Older revision		Revision as of 10:07, 24 January 2025
Line 2,517:		Line 2,517:
	Click on upload and start (Once key is uploaded and this option is clicked, NMS automatically starts, and this router device gets registered with the NMS server provided).		Click on upload and start (Once key is uploaded and this option is clicked, NMS automatically starts, and this router device gets registered with the NMS server provided).

			[[File:IAC44A NMS.png]]

	'''TR_069:'''		'''TR_069:'''

	To enable the TR_069 the user needs to click on the enable check box.		To enable the TR_069 the user needs to click on the enable check box.

			[[File:IAC44A TR069.png]]


	Once the user clicks on the check box of enable it will display all the required filed to configured.		Once the user clicks on the check box of enable it will display all the required filed to configured.

			[[File:IAC44A Tr069 Edit.png]]

	Specification details are given below:		Specification details are given below:
Line 2,560:		Line 2,562:
	\|The URL of the ACS. This is where the CPE (customer-premises equipment) will send its requests and where it will receive configurations and updates from.		\|The URL of the ACS. This is where the CPE (customer-premises equipment) will send its requests and where it will receive configurations and updates from.
	\|}		\|}


	The user should fill all the required fields and click on the save button.		The user should fill all the required fields and click on the save button.

			=== 2.10 Tunnel ===

	2.10 Tunnel

	Tunnels are a method of transporting data across a network using protocols which are not supported by that network.		Tunnels are a method of transporting data across a network using protocols which are not supported by that network.

Line 2,576:		Line 2,574:
	2.) GRE Tunnel		2.) GRE Tunnel

	3.) IPIP Tunnel		3.) IPIP Tunnel

	'''General Settings:'''		'''General Settings:'''

Wikisysop at 10:01, 24 January 2025

2025-01-24T10:01:10Z

← Older revision		Revision as of 10:01, 24 January 2025
Line 2,337:		Line 2,337:
	Click on “Add” in “New Zone Forward:” field.		Click on “Add” in “New Zone Forward:” field.

			[[File:IAC44A Zone Forwarding.png]]'''EDIT:'''

			[[File:IAC44A Zone Forwading Editing.png]]
	~~'''EDIT~~:~~'''~~


	Specification details are below:		Specification details are below:
Line 2,363:		Line 2,362:


	2.7 Loopback Rule		=== 2.7 Loopback Rule ===
			In this page the user can configure the port where he wants to forward the traffic to. Here the user can add/edit/delete different ports as per the requirement.

	~~In this page the user can configure the port where he wants to forward the traffic to. Here the user can add/edit/delete different ports as per the requirement~~.		[[File:IAC44A Loopback Rule.png]]

	The user should click on ‘add’ and then ‘edit’ to do the required changes in the port and enter the valid information in each section to configure the port for forwarding.		The user should click on ‘add’ and then ‘edit’ to do the required changes in the port and enter the valid information in each section to configure the port for forwarding.
Line 2,372:		Line 2,372:
	'''EDIT:'''		'''EDIT:'''

			[[File:IAC44A Loopback Rule Editing.png]]Specification details are given below:
	Specification details are given below:
	{\| class="wikitable"		{\| class="wikitable"
	\|SN		\|SN
Line 2,427:		Line 2,426:
	Once the user is done with the required configurations, user should click save button and then click on the update to save the changes.		Once the user is done with the required configurations, user should click save button and then click on the update to save the changes.

	= 2.8 VRRP =		=== 2.8 VRRP ===
	'''VRRP (Virtual Router Redundancy Protocol)''' is used to ensure high availability for IP routing by allowing multiple routers to work together to present the illusion of a single virtual router to the hosts on a network.		'''VRRP (Virtual Router Redundancy Protocol)''' is used to ensure high availability for IP routing by allowing multiple routers to work together to present the illusion of a single virtual router to the hosts on a network.

	In General Settings, click on ‘Enable VRRP’ and save.		In General Settings, click on ‘Enable VRRP’ and save.

			[[File:IAC44A VRRP.png]]

	In VRRP section,		In VRRP section,
Line 2,440:		Line 2,441:
	Click on ‘Delete’ if particular instance not required.		Click on ‘Delete’ if particular instance not required.

			[[File:IAC44A VRRP Status.png]]'''EDIT:'''

	~~'''EDIT~~:~~'''~~		[[File:IAC44A VRRP Editing.png]]Specification details are given below:


	Specification details are given below:

	{\| class="wikitable"		{\| class="wikitable"
Line 2,507:		Line 2,506:
	Save and update once changes have been made.		Save and update once changes have been made.

			=== 2.9 Remote Monitoring ===
	2.9 Remote Monitoring

	In this page the user can select which equipment needs to be monitored remotely.		In this page the user can select which equipment needs to be monitored remotely.

	Once the user selects the type of RMS click on save.		Once the user selects the type of RMS click on save.

			[[File:IAC44A Remote Management System.png]]'''NMS:'''
	'''NMS:'''

	In this page the user should type the server IP or domain name in the URL then click on save.		In this page the user should type the server IP or domain name in the URL then click on save.

	Click on upload and start (Once key is uploaded and this option is clicked, NMS automatically starts, and this router device gets registered with the NMS server provided).		Click on upload and start (Once key is uploaded and this option is clicked, NMS automatically starts, and this router device gets registered with the NMS server provided).

Wikisysop at 09:25, 24 January 2025

2025-01-24T09:25:47Z

← Older revision		Revision as of 09:25, 24 January 2025
Line 3,714:		Line 3,714:
	'''Year:''' Year (e.g., 2024)		'''Year:''' Year (e.g., 2024)
	\|Displays data usage statistics for the specified month and year.		\|Displays data usage statistics for the specified month and year.
	\|-
	\|
	\|
	\|
	\|
	\|-		\|-
	\|21		\|21

Wikisysop at 09:25, 24 January 2025

2025-01-24T09:25:24Z

← Older revision		Revision as of 09:25, 24 January 2025
Line 2,093:		Line 2,093:
	click on “Add and Edit” in “New Traffic Rule”.		click on “Add and Edit” in “New Traffic Rule”.

			''Refer the image below''

			[[File:IAC44A Traffic Rules.png]]

	''~~Refer the image below~~''		'''EDIT:'''

			[[File:IAC44A Traffics Rules Edit.png]]

	~~'''EDIT~~:~~'''~~

	{\| class="wikitable"		{\| class="wikitable"
Line 2,115:		Line 2,115:
	\|Restrict to Address Family		\|Restrict to Address Family

	\|1. Options: IPv4, IPv6		\|1.Options: IPv4, IPv6

	Example: IPv4 if dealing with typical internet traffic.		Example: IPv4 if dealing with typical internet traffic.
Line 2,186:		Line 2,186:


	''Refer the figure below''		''Refer the figure below''

			[[File:IAC44A SNAT Traffic Rules.png]]

	'''EDIT:'''		'''EDIT:'''

			[[File:IAC44A SNAT Traffic Rules Edit.png]]Specification details are below:
	Specification details are below:
	{\| class="wikitable"		{\| class="wikitable"
	\|SN		\|SN
Line 2,218:		Line 2,218:
	\|Example: any or a specific range like 192.168.1.0/24		\|Example: any or a specific range like 192.168.1.0/24
	\|'''-- please choose --''': Specify the source IP address or range. Leave empty if the rule applies to any source IP.		\|'''-- please choose --''': Specify the source IP address or range. Leave empty if the rule applies to any source IP.
	\|-
	\|
	\|
	\|
	\|
	\|-		\|-
	\|5		\|5
Line 2,271:		Line 2,266:
	Click on “Add and Edit” in “New parental control:” field.		Click on “Add and Edit” in “New parental control:” field.

			[[File:IAC44A Parental Control.png]]'''EDIT:'''

			[[File:IAC44A Parental Control Editing.png]]
	~~'''EDIT~~:~~'''~~


	Specification details are given below:		Specification details are given below:

Wikisysop at 09:09, 24 January 2025

2025-01-24T09:09:23Z

Show changes

Wikisysop at 07:26, 24 January 2025

2025-01-24T07:26:43Z

← Older revision		Revision as of 07:26, 24 January 2025
Line 1,299:		Line 1,299:

	'''Purpose''': This ensures that no single connection or server is overwhelmed with too much traffic, which could lead to congestion and slower performance.		'''Purpose''': This ensures that no single connection or server is overwhelmed with too much traffic, which could lead to congestion and slower performance.

			[[File:IAC44A Load Balancing.png]]

	'''EDIT:'''		'''EDIT:'''

			[[File:IAC44A Loadbalancing Edit.png]]Specification details are given below:
	Specification details are given below:
	{\| class="wikitable"		{\| class="wikitable"
	\|SN		\|SN
Line 1,356:		Line 1,357:


	2.5 VPN		=== 2.5 VPN ===

	VPN stands for '''Virtual Private Network''', it establishes a connection between the system and a remote server, which is owned by a VPN provider.		VPN stands for '''Virtual Private Network''', it establishes a connection between the system and a remote server, which is owned by a VPN provider.

Line 1,363:		Line 1,363:

	Navigate to settings >= VPN, general settings and you will see all VPN options you wish to use.		Navigate to settings >= VPN, general settings and you will see all VPN options you wish to use.

			[[File:IAC44A VPN.png]]

	There are 7 types of setting available under VPN configuration.		There are 7 types of setting available under VPN configuration.

	· General Settings		* General Settings
			* IPSEC
	· IPSEC		* Open VPN
			* Wireguard
	· Open VPN		* Zerotier
			* PPTP
	· Wireguard		* L2TP

	· Zerotier

	· PPTP

	· L2TP



	'''General Settings:'''		'''General Settings:'''

	In this page the user must choose which type of VPN connection is required for the device. The user must select from the above VPN based on its requirement. If required, the user can select all the options. The user needs to click on the save after selecting the option based on its use.		In this page the user must choose which type of VPN connection is required for the device. The user must select from the above VPN based on its requirement. If required, the user can select all the options. The user needs to click on the save after selecting the option based on its use.

			[[File:IAC44A VPN Configuration.png\|1363x1363px]]

	'''IPSEC:'''		'''IPSEC:'''
Line 1,392:		Line 1,388:
	To use IPSEC VPN, the user should check that both local and remote routers support IPSEC VPN feature.		To use IPSEC VPN, the user should check that both local and remote routers support IPSEC VPN feature.

	In this page the user can add/edit/delete the IPSEC VPN connection for the device.		In this page the user can add/edit/delete the IPSEC VPN connection for the device.''Refer the image below''


	~~''Refer the image below''~~		[[File:IAC44A IPsec.png]]

	The user needs to click on the update button once the required configuration is completed.		The user needs to click on the update button once the required configuration is completed.
Line 1,401:		Line 1,396:
	In IPSEC the user needs to click on edit button to edit the configuration of an existing VPN connection.		In IPSEC the user needs to click on edit button to edit the configuration of an existing VPN connection.

			[[File:IAC44A Ipsec Configuration.png]]

	Click on update once done with configurations.		Click on update once done with configurations.

	The tunnel will show established, showing the connection has been made.		The tunnel will show established, showing the connection has been made.

			[[File:IAC44A Ipsec Status.png]]

	Detailed specifications are below:		Detailed specifications are below:

Wikisysop at 06:59, 24 January 2025

2025-01-24T06:59:36Z

← Older revision		Revision as of 06:59, 24 January 2025
Line 1,226:		Line 1,226:

	In '''‘Status’''' tab user can see the active network connections on the device as shown above.		In '''‘Status’''' tab user can see the active network connections on the device as shown above.



	'''General Settings:'''		'''General Settings:'''
Line 1,233:		Line 1,231:
	In general settings, select any one option from the drop-down menu which you wish to imply and click on save and update.		In general settings, select any one option from the drop-down menu which you wish to imply and click on save and update.

	Click on save and update.		[[File:IAC44A Multi-WAN Configuration.png]]Click on save and update.

	'''Failover:'''		'''Failover:'''
Line 1,239:		Line 1,237:
	'''NOTE:''' Please verify that the name to be added is in the interface section of the status tab.		'''NOTE:''' Please verify that the name to be added is in the interface section of the status tab.

			[[File:IAC44A Failover.png]]'''EDIT:'''

			[[File:IAC44A Priority settings.png]]
	~~'''EDIT~~:~~'''~~



	The specifications details are below.		The specifications details are below.
Line 1,293:		Line 1,289:
	\|}		\|}
	Click on save and update tab.		Click on save and update tab.



Line 1,356:		Line 1,353:
	\|}		\|}
	Click on save and update tab.		Click on save and update tab.



Line 1,381:		Line 1,379:

	· L2TP		· L2TP



Line 1,615:		Line 1,614:

	Select as per server-side configuration. Both server and client should have same configuration.		Select as per server-side configuration. Both server and client should have same configuration.
	\|-
	\|
	\|
	\|
	\|
	\|
	\|
	\|
	\|}		\|}
	Click on save and then update the page for changes to reflect.		Click on save and then update the page for changes to reflect.