Wikisysop at 11:56, 24 January 2025

2025-01-24T11:56:47Z

← Older revision		Revision as of 11:56, 24 January 2025
Line 1:		Line 1:
	~~You can configure schedule reboot here. Like how it is configured below for the reboot~~ to ~~schedule daily at 22:59 hours, you can change the time accordingly and have the reboot type as hardware~~ or ~~software based on the activity to be carried out~~.
			== Login to GUI of device ==
			Connect router to Laptop or Desktop using a LAN connection or connect over Wi-Fi.

	~~Also, by clicking on~~ the ~~REBOOT button we can have this router device rebooted now (instantaneously)~~.		Make sure the laptop/desktop LAN/Wi-Fi interface is in DHCP mode.

	[[File:~~Reboot Dashboard~~.png\|~~frameless~~\|~~602x602px~~]]
			How to make LAN/Wi-Fi network interface in DHCP mode into Windows Operating system?

			To configure a LAN or Wi-Fi network interface in DHCP mode on a Windows operating system, follow these steps:

			Press Windows + R, type ncpa.cpl, and press Enter to open the Network Connections window.

			And locate the correct LAN/Wi-Fi interface which need to be configured as DHCP client or go to below path in the system.

			Control Panel\Network and Internet\Network and Sharing Center

			[[File:Login_to_GUI_of_device.png\|1024x1024px]]In the above image select the interface Ethernet or Wi-Fi and change the IP Version 4 (TCP/IPv4) and set in DHCP as shown in below image.

			[[File:DHCP_Setting.png\|1024x1024px]]Note: Make sure the router’s DHCP server is not disabled if it is disabled then windows system should be configured with static IP “use the following IP address” option in above image.

			Use default IP of router to access GUI.

			For LAN it is 192.168.10.1 and for Wi-Fi it is 192.168.100.1 can be used to acces router in using any browser.

			Note: For filed routers if the IP address is changed then the new IP belongs to interface should be used.

			[[File:Login_to_device.png\|1024x1024px]]

			Default credentials to login are username/password : admin/admin but if the credentials are changed then use the correct credentials.

			[[File:IAC44A_Dashboard.png\|1024x1024px]]Once logged in to GUI the above screen can be seen where actual information of the device will be present.

			Note: All the SILBO routers/gateway with model number RBxx, IAxx-x,RCxx, RDxx, GRDxx, RFxx,IExx etc GUI is same so the proces remains same.

			== Maintenance Reboot ==
			You can configure schedule reboot here.

			Navigate to Maintenance > Reboot,

			First option is to directly reboot the device without enabling the maintenance reboot tab.

			Click on “Reboot Now” at the bottom of the screen to start the reboot process.

			[[File:Maintenance Reboot 1.png]]

			To start maintenance reboot process first the user needs to fill all the required fields as shown below.
			[[File:Maintenance Reboot 2.png]]


			Specification details are given below:
	{\| class="wikitable"		{\| class="wikitable"
	\|SN		\|SN
	\|Field ~~name~~		\|Field Name
	\|Sample Value		\|Sample Value
	\|Description		\|Description
	\|-		\|-
	\|1		\|1
	\|Enable Maintenance Reboot		\|Enable Maintenance Reboot
	\|		\|Enable/Disable
	\|~~Tick~~ the ~~box for enable Maintenance Reboot~~		\|Indicates whether the maintenance reboot feature is enabled or not.
	\|-		\|-
	\|2		\|2
	\|Type		\|Type
	\|Maintenance Reboot		\|Maintenance Reboot
	\|~~Indicate~~ the ~~Maintenace Type~~		\|Specifies the type of reboot being scheduled.
	\|-		\|-
	\|3		\|3
	\|Reboot ~~type~~		\|Reboot Type
	\|Hardware		\|Hardware
	\|~~Indicate~~ the ~~Reboot type~~		\|'''Hardware''': A hardware reboot involves restarting the entire device as if it were powered off and on again.
	\|-		\|-
	\|4		\|4
	\|Minutes		\|Minutes
	\|59		\|Example: 59
	\|~~Indicates~~ the ~~Minutes~~		\|The minute at which the reboot should occur (0-59).
	\|-		\|-
	\|5		\|5
	\|Hours		\|Hours
	\|22		\|Example: 22 (10 PM)
	\|~~Indicates~~ the ~~Hours~~		\|The hour at which the reboot should occur (0-23, in 24-hour format).
	\|-		\|-
	\|6		\|6
	\|Day of Month		\|Day Of Month
	\|1		\|Example: All
	\|~~Indicates Day~~ of ~~Month~~		\|Specifies which days of the month the reboot should occur (1-31). "All" means it will occur every day.
	\|-		\|-
	\|7		\|7
	\|Month		\|Month
	\|~~January~~		\|Example: All
	\|~~Indicates~~ the ~~Month~~		\|Specifies which months the reboot should occur (1-12). "All" means it will occur every month.
	\|-		\|-
	\|8		\|8
	\|Day ~~of week~~		\|Day Of Week
	\|~~Sunday~~		\|Example: All
	\|~~Indicates~~ day of week		\|Specifies which days of the week the reboot should occur (0-6, where 0 is Sunday). "All" means it will occur every day of the week.
	\|}		\|}
			According to the above shown configuration, the reboot is scheduled daily at 22:59 hours i.e. 11:59pm.

Wikisysop: Created page with "You can configure schedule reboot here. Like how it is configured below for the reboot to schedule daily at 22:59 hours, you can change the time accordingly and have the reboot type as hardware or software based on the activity to be carried out. Also, by clicking on the REBOOT button we can have this router device rebooted now (instantaneously). 602x602px {| class="wikitable" |SN |Field name |Sample Value |Description |- |1 |En..."

2024-07-31T09:43:57Z

Created page with "You can configure schedule reboot here. Like how it is configured below for the reboot to schedule daily at 22:59 hours, you can change the time accordingly and have the reboot type as hardware or software based on the activity to be carried out. Also, by clicking on the REBOOT button we can have this router device rebooted now (instantaneously). frameless|602x602px {| class="wikitable" |SN |Field name |Sample Value |Description |- |1 |En..."

New page

You can configure schedule reboot here. Like how it is configured below for the reboot to schedule daily at 22:59 hours, you can change the time accordingly and have the reboot type as hardware or software based on the activity to be carried out.

Also, by clicking on the REBOOT button we can have this router device rebooted now (instantaneously).

[[File:Reboot Dashboard.png|frameless|602x602px]]
{| class="wikitable"
|SN
|Field name
|Sample Value
|Description
|-
|1
|Enable Maintenance Reboot
|
|Tick the box for enable Maintenance Reboot
|-
|2
|Type
|Maintenance Reboot
|Indicate the Maintenace Type
|-
|3
|Reboot type
|Hardware
|Indicate the Reboot type
|-
|4
|Minutes
|59
|Indicates the Minutes
|-
|5
|Hours
|22
|Indicates the Hours
|-
|6
|Day of Month
|1
|Indicates Day of Month
|-
|7
|Month
|January
|Indicates the Month
|-
|8
|Day of week
|Sunday
|Indicates day of week
|}

Maintenance Reboot - Revision history

Wikisysop at 11:56, 24 January 2025