Wikisysop at 08:55, 16 August 2024

2024-08-16T08:55:12Z

← Older revision		Revision as of 08:55, 16 August 2024
Line 18:		Line 18:
	Connect router to your device using Wi-Fi, check device name and password on the device’s label.		Connect router to your device using Wi-Fi, check device name and password on the device’s label.

	* For Example: SSID: APClient_37B11241001 PWD: 12345678		* For Example: SSID: APClient_37B11241001
			* PWD: 12345678

	== 3. Login to device: ==		== 3. Login to device: ==

Wikisysop: Created page with "== 1. What is OpenVPN (tun)? == '''OpenVPN''' is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. == 2. Prerequisites: == * OpenVPN connect installed on your device. * You need to generate the necessary certificates and keys from open server. * Connecting board to device: Connect your router to you..."

2024-08-16T08:53:42Z

Created page with "== 1. What is OpenVPN (tun)? == '''OpenVPN''' is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. == 2. Prerequisites: == * OpenVPN connect installed on your device. * You need to generate the necessary certificates and keys from open server. * Connecting board to device: Connect your router to you..."

New page

== 1. What is OpenVPN (tun)? ==
'''OpenVPN''' is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities.

== 2. Prerequisites: ==

* OpenVPN connect installed on your device.
* You need to generate the necessary certificates and keys from open server.
* Connecting board to device:

Connect your router to your device via

* Ethernet cable:

Directly connect router port with RS45 wire to your device.

* Wireless network connection:

Connect router to your device using Wi-Fi, check device name and password on the device’s label.

* For Example: SSID: APClient_37B11241001 PWD: 12345678

== 3. Login to device: ==

* To enter the router’s Web interface (web IU), type 192.168.10.1 into the URL field of your internet browser.
* Use the following login information when prompted for authentication.

Username: admin

Password: admin

[[File:Login to device.png|frameless|620x620px]]

== 4. Configuration: ==
Now we can configure OpenVPN Server and Client instances. For this example, we will be creating a TUN (Tunnel) type connection that uses the UDP protocol for data transfer and TLS for Authentication.

Here the router is server and PC is client.

'''Server (Router) Configuration:'''

1.) Click on settings => VPN

2.) In general settings, enable VPN

3.) Save the changes made

4.) Click on OpenVPN

5.) In Add New Configurations, give a name (Test in this case)

6.) Click Add

[[File:Client to Client VPN Configuration.png|frameless|620x620px]]

7.) Click on upload

8.) After pop-up occurs, upload the server certificate created ('''Server'''; LAN IP: '''192.168.10.1'''; WAN (Public static) IP: '''45.118.163.8''') in this case.

9.) Click Apply

10.) Update the page

[[File:VPN Config.png|frameless|620x620px]]

''*Disconnect router from PC for testing purpose*''

== 5. Testing OpenVPN Client to Client Connection: ==

* Ping server(router) from PC, use the virtual IP assigned to your server

(10.8.1.19 in this case).

[[File:Testing OpenVPN Client to Client Connection.png|frameless|620x620px]]

* Ping PC from Server(router), use the virtual IP assigned to PC

(10.8.1.20 in this case).

[[File:Ping PC from Server.png|frameless|620x620px]]

* Ping LAN_IP (192.168.10.1 in this case) from Server(router).

[[File:Ping LAN IP .png|frameless|620x620px]]

* '''To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.).'''

* From the Client side, make sure to enter the correct '''Remote host/IP address''' (45.118.163.8 in this case). This is the Server's Public IP address.

OpenVPN Client to Client Connection - Revision history

Wikisysop at 08:55, 16 August 2024