ZeroTier Download and Configuration - Revision history

Wikisysop: /* Access the Webpage: */

2025-01-03T04:45:07Z

Access the Webpage:

← Older revision		Revision as of 04:45, 3 January 2025
Line 149:		Line 149:
	[[File:Ping Test.png\|1024x1024px]]		[[File:Ping Test.png\|1024x1024px]]

	== '''Access the Webpage:''' ==		== '''Access the Webpage''' ==
	[[File:Webpage Access.png\|1024x1024px]]		[[File:Webpage Access.png\|1024x1024px]]

	A ZeroTier network has been created between source and destination, now you can add multiple nodes in the same network and access one device from another device.		A ZeroTier network has been created between source and destination, now you can add multiple nodes in the same network and access one device from another device.

Wikisysop at 04:44, 3 January 2025

2025-01-03T04:44:52Z

← Older revision		Revision as of 04:44, 3 January 2025
Line 34:		Line 34:
	Default credentials to login are username/password : admin/admin but if the credentials are changed then use the correct credentials.		Default credentials to login are username/password : admin/admin but if the credentials are changed then use the correct credentials.

	[[File:IAB44C Dashboard BAND and Operator Lock.png\|1024x1024px]]		[[File:IAB44C Dashboard BAND and Operator Lock.png\|1024x1024px]]Once logged in to GUI the above screen can be seen where actual information of the device will be present.

			Note: All the SILBO routers/gateway with model number RBxx, IAxx-x,RCxx, RDxx, GRDxx, RFxx,IExx etc GUI is same so the proces remains same.

			== Pre-requisite ==

			* Download Zerotier_one application on PC or any other device.
			* SILBO gateway (IAB44-C is used in this manual)
			* SIM card with active internet. In case of M2M sim card, allow traffic through VPN by contacting your ISP.
			* Navigate to Settings > Firewall, accept all 3 fields from the drop-down menu which is reject by default and save. This will allow incoming traffic from zerotier.

			[[File:Firewall accept.png\|1024x1024px]]

			== Setup ZeroTier on PC ==
			Visit the ZeroTier website and download the latest version for your operating system (Windows, macOS, Linux, iOS, Android).

			[[File:Zerotier .png\|1024x1024px]]

			Create a zerotier account to connect to our router.

			Click on ‘Sign Up’ tab as seen in the image above, sign up page will appear as shown below.


			[[File:Zerotier Account Creation.png\|1024x1024px]]Login into your ZeroTier account to access the ZeroTier Central management console.

			== Create a Network ==
			In ZeroTier Central, click on "Create a Network".

			A unique 16-digit network ID will generate for your new network.

			[[File:Zerotier Create A Network.png\|1024x1024px]]

			== Configure the Network ==
			'''Name:'''

			A descriptive name for easy management.

			[[File:Zerotier Configure the Network.png\|1024x1024px]]'''Access Control:'''

			Decide if your network is private (requires approval to join) or public (anyone with the network ID can join).

			[[File:Zerotier Access Control.png\|1024x1024px]]

			'''IPv4/IPv6 Addressing:'''

			Set IP address ranges for your network devices.

			[[File:Zerotier IPv4-IPv6 Addressing.png\|1024x1024px]]

			'''Members:'''

			Manage members and set permissions.

			Copy the 16-digit unique Network ID and paste it in the router from web UI page.

			Once the router connects to the network, pop-up will appear in this section as shown below.

			[[File:Zerotier Members.png\|1024x1024px]]

			'''NOTE:'''

			Once your router connects to the network, an IP should generate in managed IPs section as shown above.

			Physical IP should be generated as well for successful connection.

			Connect your PC or any other device to this Network via Zerotier one Application downloaded on PC or other device.

			Simply copy-paste your network id and connect as shown below.

			[[File:Zerotier Joining.png\|1024x1024px]]

			This device will also get connected on the zerotier network as shown below.

			Same way you can add upto 10 members in one single network.

			[[File:Zerotier network .png\|797x797px]]

			== ZeroTier VPN ==
			Navigate to settings => VPN,

			In General settings, enable zerotier and save.

			[[File:ZeroTier VPN.png\|1024x1024px]]

			In Add New Configuration,

			Give a name (Ex: Test) and ADD.

			[[File:Zerotier dashboard.png\|1024x1024px]]EDIT and paste Network ID and add port number as shown.

			[[File:Zerotier Network ID and Port number.png\|1024x1024px]]

			Save and update the page.

			Upon update, NodeID will generate, which is the unique number to identify your router.

			[[File:Zerotier NodeID .png\|1024x1024px]]

			Cross-verify this NodeID in Zerotier central members section to know that the router has successfully been added to the network.

			== Test the Connection ==
			Before accessing the router, add routes in zerotier central,

			Open ZeroTier central, in the managed routes section, add the newly generated IP address '''(via)''' and the destination IP address (Ex: 192.168.10.0/24) and submit.

			[[File:Zero Tier Central settings.png\|1024x1024px]]'''Note''': Before accessing the routers webpage from any device (laptop/phone) make sure your device is not connected to the router to avoid looping of the networks.

			'''Ping Test:'''

			Ping the new generated IP (192.168.191.181 in this case).

			If the connection is made successfully, you will be able to ping this IP remotely from your PC which has also been added to the zerotier network.

			[[File:Ping Test.png\|1024x1024px]]

			== '''Access the Webpage:''' ==
			[[File:Webpage Access.png\|1024x1024px]]

			A ZeroTier network has been created between source and destination, now you can add multiple nodes in the same network and access one device from another device.

Wikisysop at 04:12, 3 January 2025

2025-01-03T04:12:32Z

← Older revision		Revision as of 04:12, 3 January 2025
Line 1:		Line 1:
	==~~= 1. What is ZeroTier? Why do we use ZeroTier? =~~==		== Login to GUI of device ==
	~~ZeroTier is~~ a ~~tool that lets you create your own private network over the internet. ZeroTier is a networking solution that enables the creation of virtual private networks (VPNs). It allows devices to~~ connect over ~~the internet as if they were on the same local area network (LAN)~~.		Connect router to Laptop or Desktop using a LAN connection or connect over Wi-Fi.

	~~ZeroTier establishes secure, direct peer~~-~~to-peer connections using end-to-end encryption, facilitating seamless communication between devices across different physical locations~~.		Make sure the laptop/desktop LAN/Wi-Fi interface is in DHCP mode.

	~~=== 2. Install ZeroTier: ===~~		How to make LAN/Wi-Fi network interface in DHCP mode into Windows Operating system?

	~~==== Download ZeroTier: ====~~		To configure a LAN or Wi-Fi network interface in DHCP mode on a Windows operating system, follow these steps:
	~~Visit the ZeroTier website and download the appropriate version for your~~ operating system ~~(Windows~~, ~~macOS, Linux, iOS, Android).~~

	~~[[File:Download ZeroTier~~.~~png\|frameless\|651x651px]]~~		Press Windows + R, type ncpa.cpl, and press Enter to open the Network Connections window.

	~~=== 3~~. ~~Create a ZeroTier Account: ===~~		And locate the correct LAN/Wi-Fi interface which need to be configured as DHCP client or go to below path in the system.

	~~==== 3.1 Sign up: ====~~

	* Go to ZeroTier Central and ~~sign up for a free account. [[File:Create a Zero Tier Account.png\|frameless\|639x639px]]~~		Control Panel\Network and Internet\Network and Sharing Center

	~~==== 3~~.~~2 Login: ====~~		[[File:Login to GUI of device.png\|1024x1024px]]

	* Login into your ZeroTier account to access the ~~ZeroTier Central management console. [[File:Login to ZeroTier VPN~~.~~png\|frameless\|649x649px]]~~		In the above image select the interface Ethernet or Wi-Fi and change the IP Version 4 (TCP/IPv4) and set in DHCP as shown in below image.

	~~=== 4~~. ~~Create a Network: ===~~		[[File:DHCP Setting.png\|1024x1024px]]

	* In ZeroTier Central, click on "Create a Network". This will generate a unique 16-digit network ID for your new network. [[File:Create a Zero Tier Network.png\|frameless\|646x646px]] [[File:~~Zero Tier Network ID~~.~~png\|frameless\|647x647px]]~~		Note: Make sure the router’s DHCP server is not disabled if it is disabled then windows system should be configured with static IP “use the following IP address” option in above image.

	~~=== 5~~. ~~Configure the Network: ===~~		Use default IP of router to access GUI.

	* Name: [[File:Network ID.~~png\|frameless\|625x625px]]~~		For LAN it is 192.168.10.1 and for Wi-Fi it is 192.168.100.1 can be used to acces router in using any browser.
	* Private/Public IP: Decide if your network is ~~private (requires approval~~ to ~~join) or public (anyone with the network ID can join). [[File:Access Control~~.~~png\|frameless\|620x620px]]~~

	* IPv4/IPv6 Addressing: Set IP address ranges for your network devices. [[File:Set IP address ranges for your network devices.png\|frameless\|619x619px]]

	* Access Control: ~~Manage members and set permissions~~. ~~[[File:ZeroTier Access Control.png\|frameless\|624x624px]]~~		Note: For filed routers if the IP address is changed then the new IP belongs to interface should be used.

	~~=== 6~~. ~~Login to Webpage: ===~~		[[File:Log In.png\|1024x1024px]]

	* Step 1:		Default credentials to login are username/password : admin/admin but if the credentials are changed then use the correct credentials.

	~~Login using SW_LAN_IP address 192.168.10.1~~		[[File:IAB44C Dashboard BAND and Operator Lock.png\|1024x1024px]]

	[[File:~~Login to device.png\|frameless\|629x629px]]~~

	* Step 2:

	~~Go to settings => VPN , in general settings , enable ZeroTier and save.~~

	~~[[File:VPN~~ Dashboard~~.png\|frameless\|632x632px]]~~


	~~[[File:General Configuration Zerotier Enable.png\|frameless\|657x657px]]~~

	* Step 3:

	~~In ZeroTier column, Add new configuration section, Add a name (Ex : Test) in the column. Edit the newly created network ID~~ and ~~port number (9993/9994/9995), save and update the page.~~

	~~[[File:ZeroTier column~~.png\|~~frameless\|657x657px~~]]

	~~[[File:Add new configuration section.png\|frameless\|657x657px]]~~

	* Step 4:

	If your network is private, you need to authorize new devices in ZeroTier Central, go to the "Members" section of your network in ZeroTier Central, Find the device you want to authorize and click the checkbox next to it.

	~~[[File:ZeroTier Central.png\|frameless\|667x667px]]~~

	~~The same NodeID should be visible on your device to show its connectivity with ZeroTier.~~

	~~[[File:NodeID .png\|frameless\|667x667px]]~~

	* Step 5:

	~~Go to ZeroTier central, in the managed routes section , add the newly generated IP address '''(via)''' and the destination IP address ( Ex: 192.168.10.0/24) and submit.~~

	~~[[File:Go to ZeroTier central.png\|frameless\|667x667px]]~~

	~~=== 7. Remote Access to Router: ===~~
	~~Step 1: Download the ZeroTier app in your laptop/phone, open the ZeroTier client in your laptop and click on “join network”.~~

	~~[[File:Remote Access to Router.png\|frameless\|624x624px]]~~

	* Step 2:

	~~Copy the 16-digit network ID from your network settings in ZeroTier Central and click "Join".~~

	~~[[File:ZeroTier Central .png\|frameless\|620x620px]]~~

	* Step 3:

	If your network is private, you need to authorize new devices in ZeroTier Central, go to the "Members" section of your network in ZeroTier Central, Find the device you want to authorize and click the checkbox next to it.

	~~[[File:Authorize new devices in ZeroTier Central.png\|frameless\|618x618px]]~~

	* Step 4:

	To test connectivity, use ping or other network tools to test connectivity between devices in your ZeroTier network. For example, you can ping the ZeroTier IP address of one device from another device.

	~~[[File:ZeroTier IP address .png\|frameless\|618x618px]]~~


	~~Also access the webpage using the same IP address remotely.~~

	~~[[File:Login to device.png\|frameless\|621x621px]]~~

	~~=== 8. Conclusion: ===~~
	By following these steps, your router should be configured to use ZeroTier, allowing all devices connected to the router to communicate over the ZeroTier network. A ZeroTier network has been created between source and destination, now you can add multiple nodes in the same network and access one device from another device.

Wikisysop: Created page with "=== 1. What is ZeroTier? Why do we use ZeroTier? === ZeroTier is a tool that lets you create your own private network over the internet. ZeroTier is a networking solution that enables the creation of virtual private networks (VPNs). It allows devices to connect over the internet as if they were on the same local area network (LAN). ZeroTier establishes secure, direct peer-to-peer connections using end-to-end encryption, facilitating seamless communication between device..."

2024-08-01T09:30:42Z

Created page with "=== 1. What is ZeroTier? Why do we use ZeroTier? === ZeroTier is a tool that lets you create your own private network over the internet. ZeroTier is a networking solution that enables the creation of virtual private networks (VPNs). It allows devices to connect over the internet as if they were on the same local area network (LAN). ZeroTier establishes secure, direct peer-to-peer connections using end-to-end encryption, facilitating seamless communication between device..."

New page

=== 1. What is ZeroTier? Why do we use ZeroTier? ===
ZeroTier is a tool that lets you create your own private network over the internet. ZeroTier is a networking solution that enables the creation of virtual private networks (VPNs). It allows devices to connect over the internet as if they were on the same local area network (LAN).

ZeroTier establishes secure, direct peer-to-peer connections using end-to-end encryption, facilitating seamless communication between devices across different physical locations.

=== 2. Install ZeroTier: ===

==== Download ZeroTier: ====
Visit the ZeroTier website and download the appropriate version for your operating system (Windows, macOS, Linux, iOS, Android).

[[File:Download ZeroTier.png|frameless|651x651px]]

=== 3. Create a ZeroTier Account: ===

==== 3.1 Sign up: ====

* Go to ZeroTier Central and sign up for a free account. [[File:Create a Zero Tier Account.png|frameless|639x639px]]

==== 3.2 Login: ====

* Login into your ZeroTier account to access the ZeroTier Central management console. [[File:Login to ZeroTier VPN.png|frameless|649x649px]]

=== 4. Create a Network: ===

* In ZeroTier Central, click on "Create a Network". This will generate a unique 16-digit network ID for your new network. [[File:Create a Zero Tier Network.png|frameless|646x646px]] [[File:Zero Tier Network ID.png|frameless|647x647px]]

=== 5. Configure the Network: ===

* Name: [[File:Network ID.png|frameless|625x625px]]
* Private/Public IP: Decide if your network is private (requires approval to join) or public (anyone with the network ID can join). [[File:Access Control.png|frameless|620x620px]]

* IPv4/IPv6 Addressing: Set IP address ranges for your network devices. [[File:Set IP address ranges for your network devices.png|frameless|619x619px]]

* Access Control: Manage members and set permissions. [[File:ZeroTier Access Control.png|frameless|624x624px]]

=== 6. Login to Webpage: ===

* Step 1:

Login using SW_LAN_IP address 192.168.10.1

[[File:Login to device.png|frameless|629x629px]]

* Step 2:

Go to settings => VPN , in general settings , enable ZeroTier and save.

[[File:VPN Dashboard.png|frameless|632x632px]]

[[File:General Configuration Zerotier Enable.png|frameless|657x657px]]

* Step 3:

In ZeroTier column, Add new configuration section, Add a name (Ex : Test) in the column. Edit the newly created network ID and port number (9993/9994/9995), save and update the page.

[[File:ZeroTier column.png|frameless|657x657px]]

[[File:Add new configuration section.png|frameless|657x657px]]

* Step 4:

If your network is private, you need to authorize new devices in ZeroTier Central, go to the "Members" section of your network in ZeroTier Central, Find the device you want to authorize and click the checkbox next to it.

[[File:ZeroTier Central.png|frameless|667x667px]]

The same NodeID should be visible on your device to show its connectivity with ZeroTier.

[[File:NodeID .png|frameless|667x667px]]

* Step 5:

Go to ZeroTier central, in the managed routes section , add the newly generated IP address '''(via)''' and the destination IP address ( Ex: 192.168.10.0/24) and submit.

[[File:Go to ZeroTier central.png|frameless|667x667px]]

=== 7. Remote Access to Router: ===
Step 1: Download the ZeroTier app in your laptop/phone, open the ZeroTier client in your laptop and click on “join network”.

[[File:Remote Access to Router.png|frameless|624x624px]]

* Step 2:

Copy the 16-digit network ID from your network settings in ZeroTier Central and click "Join".

[[File:ZeroTier Central .png|frameless|620x620px]]

* Step 3:

If your network is private, you need to authorize new devices in ZeroTier Central, go to the "Members" section of your network in ZeroTier Central, Find the device you want to authorize and click the checkbox next to it.

[[File:Authorize new devices in ZeroTier Central.png|frameless|618x618px]]

* Step 4:

To test connectivity, use ping or other network tools to test connectivity between devices in your ZeroTier network. For example, you can ping the ZeroTier IP address of one device from another device.

[[File:ZeroTier IP address .png|frameless|618x618px]]

Also access the webpage using the same IP address remotely.

[[File:Login to device.png|frameless|621x621px]]

=== 8. Conclusion: ===
By following these steps, your router should be configured to use ZeroTier, allowing all devices connected to the router to communicate over the ZeroTier network. A ZeroTier network has been created between source and destination, now you can add multiple nodes in the same network and access one device from another device.