RB44 Manual

From Silbo Networks

This page contains the user manual for RB44.

Connecting with the device to the System (Laptop/Desktop).

To log in to SILBO_RB44 by connecting the router to your laptop or desktop via LAN or using Wi-Fi, please follow the steps below.


Connecting via LAN:

Connect your laptop's LAN port to one of the router's LAN interfaces. Ensure that you select any LAN interface (there are two available) while making sure the WAN interface is not used.

                                                                                                                                                         

How to connect with the SILBO_RB44 application

Once the LAN connection is established between the device and the laptop or the desktop

Please open the command prompt and ping go get the ip config of that device.

Type the command Ipconfig

How to connect with the SILBO RB44 application

It will provide the Ip address/url of that device through which the application can be accessed.


Log In

Open the web browser and type the IP address in the URL.

It will show the log in page of the application. Give the valid credentials for the username and password to login to the application page.

Once the user credentials are provided it will direct to the landing page of the application.


The “Status” landing page shows all the detailed specification of the device like system, memory storage and connection tracking etc.


The application is divided in to 6 Modules.

  • Info
  • Settings
  • Maintenance
  • Status
  • Features
  • Logout

Info

Overview

System Log

Kernel Log

Setting

Network

SIM

Internet

VPN

Firewall

Loopback Rule

Remote Monitoring

Tunnel

Maintenance

General

Password

Reboot

Import and Export

Firmware Upgrade

Monitor Application

Status

Interfaces

Internet

Modem

Route

Features

Mac Address Binding

URL Filtering

Web Server

Wi-Fi MacID Filtering

Routing

Others

Logout