GRD44B-5R Quick Start Guide v2
Quick Start Guide for SILBO-GRD44B-5R

1. About Router.
1.1 LED Indication


LED | STATUS | INDICATION |
---|---|---|
Cellular Mode | ON/OFF | ON indicates Network connection mode is 4G.
OFF indicate Network connection mode is 2G/3G. |
Modem Activity | ON/OFF Flashing | Flashing slowly (200ms ON/1800ms OFF) Network searching.
Flashing slowly (1800ms ON/200ms OFF) Idle. Flashing quickly (125ms ON/125ms OFF) Data transfer is ongoing. |
Wi-Fi | ON/OFF Flashing | ON indicates Wi-Fi Network is ready.
Flashing indicates Data transfer is ongoing/Device booting indication. |
Power | ON/OFF | Turns ON as the device is powered with 9-30V DC. |
RS485 RX | Flashing | Flashing indicates RS485 Interface data reception ongoing. |
RS485 TX | Flashing | Flashing indicates RS485 Interface data transmission ongoing. |
1.3 Interfaces



1.4 SIM Insertion / Removal Process
Insertion of primary SIM and secondary SIM as per below Figure. The SIM connector in the SILBO-GRD44B-5R router is push-push type. You push to insert the SIM (until you hear a click sound) and push to extract the SIM out.

2. Web Page Login
Follow the below instructions to log into devices WEBGUI.
Connect the LAPTOP/Desktop to the LAN interface(ETH1) or connect to the router/Gateway using Mobile/Tablet/LAPTOP over Wi-Fi.
Router/Gateway will assign IP using built-in DHCP server or LAN/WLAN Client can have static IP in 192.168.10.x/24 or 192.168.100.x/24 subnet respectively for LAN or Wi-Fi interface.
Use LAN IP 192.168.10.1 or WLAN IP 192.168.100.1 in the web browser to log in as shown.

Login credentials -
WebUI: admin/admin
Wi-Fi SSID: AP_(device serial number)
Wi-Fi Password: 12345678
For support write an email to routersupport@invendis.com