View source for GRD44B-5R Quick Start Guide v2


== Quick Start Guide for SILBO-GRD44B-5R ==
[[File:GRD44B-5R OUTLINE .png|center|350x350px]]
== 1. About Router. ==

=== 1.1 LED Indication ===
[[File:GRD44B-5R LED Indication.png|center|350x350px]][[File:Grd44b 5r led indication 1.png|center|335x335px]]
{| class="wikitable"style="margin:auto;"
|+
!LED
!STATUS
!INDICATION
|-
|Cellular Mode
|ON/OFF
|ON indicates Network connection mode is 4G. 
OFF indicate Network connection mode is 2G/3G.
|-
|Modem Activity
|ON/OFF Flashing
|Flashing slowly (200ms ON/1800ms OFF) Network searching.
Flashing slowly (1800ms ON/200ms OFF) Idle. 

Flashing quickly (125ms ON/125ms OFF) Data transfer is ongoing.
|-
|Wi-Fi
|ON/OFF Flashing
|ON indicates Wi-Fi Network is ready. 
Flashing indicates Data transfer is ongoing/Device booting indication.
|-
|Power
|ON/OFF
|Turns ON as the device is powered with 9-30V DC.
|-
|RS485 RX
|Flashing
|Flashing indicates RS485 Interface data reception ongoing.
|-
|RS485 TX
|Flashing
|Flashing indicates RS485 Interface data transmission ongoing.
|}

=== 1.3 Interfaces ===
[[File:Grd44b 5r front view outline.png|center|350x350px]]

[[File:Grd44b side view outline.png|center|350x350px]]

[[File:Grd44b 5r side view outline .png|center|350x350px]]

=== 1.4 SIM Insertion / Removal Process ===
Insertion of primary SIM and secondary SIM as per below Figure. The SIM connector in the SILBO-GRD44B-5R router is push-push type. You push to insert the SIM (until you hear a click sound) and push to extract the SIM out.

[[File:Grd44b 5r SIM Insertion - Removal Process.png|center|350x350px]][[File:Sim outline.png|frameless|120x120px]]

== 2. Web Page Login ==
Follow the below instructions to log into devices WEBGUI. 



Connect the LAPTOP/Desktop to the LAN interface(ETH1) or connect to the router/Gateway using Mobile/Tablet/LAPTOP over Wi-Fi. 



Router/Gateway will assign IP using built-in DHCP server or LAN/WLAN Client can have static IP in 192.168.10.x/24 or 192.168.100.x/24 subnet respectively for LAN or Wi-Fi interface. 

Use LAN IP 192.168.10.1 or WLAN IP 192.168.100.1 in the web browser to log in as shown.

[[File:Login to device.png|center|679x679px]]

'''Login credentials -''' 

'''WebUI:''' admin/admin 

'''Wi-Fi SSID:''' AP_(device serial number) 

'''Wi-Fi Password:''' 12345678 

For support write an email to '''routersupport@invendis.com'''
[[Category:Quick start Guide's]]