Revision as of 06:40, 28 November 2024

Quick Start Guide for SILBO-GRD44B-5R

1. About Router.

1.1 LED Indication


LED	STATUS	INDICATION
Cellular Mode	ON/OFF	ON indicates Network connection mode is 4G. OFF indicate Network connection mode is 2G/3G.
Modem Activity	ON/OFF Flashing	Flashing slowly (200ms ON/1800ms OFF) Network searching. Flashing slowly (1800ms ON/200ms OFF) Idle. Flashing quickly (125ms ON/125ms OFF) Data transfer is ongoing.
Wi-Fi	ON/OFF Flashing	ON indicates Wi-Fi Network is ready. Flashing indicates Data transfer is ongoing/Device booting indication.
Power	ON/OFF	Turns ON as the device is powered with 9-30V DC.
RS485 RX	Flashing	Flashing indicates RS485 Interface data reception ongoing.
RS485 TX	Flashing	Flashing indicates RS485 Interface data transmission ongoing.

1.3 Interfaces

1.4 SIM Insertion / Removal Process

Insertion of primary SIM and secondary SIM as per below Figure. The SIM connector in the SILBO-GRD44B-5R router is push-push type. You push to insert the SIM (until you hear a click sound) and push to extract the SIM out.

2. Web Page Login

Follow the below instructions to log into devices WEBGUI.

Connect the LAPTOP/Desktop to the LAN interface(ETH1) or connect to the router/Gateway using Mobile/Tablet/LAPTOP over Wi-Fi.

Router/Gateway will assign IP using built-in DHCP server or LAN/WLAN Client can have static IP in 192.168.10.x/24 or 192.168.100.x/24 subnet respectively for LAN or Wi-Fi interface.

Use LAN IP 192.168.10.1 or WLAN IP 192.168.100.1 in the web browser to log in as shown.

Login credentials -

WebUI: admin/admin

Wi-Fi SSID: AP_(device serial number)

Wi-Fi Password: 12345678

For support write an email to routersupport@invendis.com

@@ Line 5: / Line 5: @@
 === 1.1 LED Indication ===
 [[File:GRD44B-5R LED Indication.png|center|350x350px]][[File:Grd44b 5r led indication 1.png|center|350x350px]]
+{| class="wikitable"|center|
+|+
+!LED
+!STATUS
+!INDICATION
+|-
+|Cellular Mode
+|ON/OFF
+|ON indicates Network connection mode is 4G.
+OFF indicate Network connection mode is 2G/3G.
+|-
+|Modem Activity
+|ON/OFF Flashing
+|Flashing slowly (200ms ON/1800ms OFF) Network searching.
+Flashing slowly (1800ms ON/200ms OFF) Idle.
+Flashing quickly (125ms ON/125ms OFF) Data transfer is ongoing.
+|-
+|Wi-Fi
+|ON/OFF Flashing
+|ON indicates Wi-Fi Network is ready.
+Flashing indicates Data transfer is ongoing/Device booting indication.
+|-
+|Power
+|ON/OFF
+|Turns ON as the device is powered with 9-30V DC.
+|-
+|RS485 RX
+|Flashing
+|Flashing indicates RS485 Interface data reception ongoing.
+|-
+|RS485 TX
+|Flashing
+|Flashing indicates RS485 Interface data transmission ongoing.
+|}
+=== 1.3 Interfaces ===
+[[File:Grd44b 5r front view outline.png|center|350x350px]]
+[[File:Grd44b side view outline.png|center|350x350px]]
+[[File:Grd44b 5r side view outline .png|center|350x350px]]
+=== 1.4 SIM Insertion / Removal Process ===
+Insertion of primary SIM and secondary SIM as per below Figure. The SIM connector in the SILBO-GRD44B-5R router is push-push type. You push to insert the SIM (until you hear a click sound) and push to extract the SIM out.
+[[File:Grd44b 5r SIM Insertion - Removal Process.png|center|350x350px]][[File:Sim outline.png|frameless|120x120px]]
+== 2. Web Page Login ==
+Follow the below instructions to log into devices WEBGUI.
+Connect the LAPTOP/Desktop to the LAN interface(ETH1) or connect to the router/Gateway using Mobile/Tablet/LAPTOP over Wi-Fi.
+Router/Gateway will assign IP using built-in DHCP server or LAN/WLAN Client can have static IP in 192.168.10.x/24 or 192.168.100.x/24 subnet respectively for LAN or Wi-Fi interface.
+Use LAN IP 192.168.10.1 or WLAN IP 192.168.100.1 in the web browser to log in as shown.
+[[File:Login to device.png|center/577x577px]]
+Login credentials -
+WebUI: admin/admin
+Wi-Fi SSID: AP_(device serial number)
+Wi-Fi Password: 12345678
+For support write an email to routersupport@invendis.com